HP Designjet T1120 SD-MFP Guide De Référence Rapide page 41

or interrupt the load process. This step can take up to ten minutes to
complete.
6. At the end of the system load process, you will be asked to calibrate the touch
screen. Press the arrows and OK button when prompted.
7. Select the new language for your system software.
8. Accept the HP license agreement.
9. Your system will complete the update process and start up your scan and copy
program interface in the new language you selected in step 7.
Install new system software
A new software version for your system can be supplied in the following ways:
●
On a USB flash memory
●
Through a network PC: Internet download, CD-ROM, other
To install a new software version from a USB flash memory
1. Press Options > Advanced Options > Software Update.
2. Be sure to wait for the Software Update & Recovery menu to appear before
proceeding with the next step.
3. Insert the USB flash memory into the USB port on the side of the touch screen.
4. Choose the System Update/Recover option in the Software Update &
Recovery menu.
5. The new program version image will appear in the program version image list.
It can be identified by the text "USB" in the list.
6. Select this image to install it.
7. Select the Return to normal scanner operation button and confirm. The
system will load and initialize all its parameters. Do not turn off the scanner
or interrupt the load process. This step can take up to ten minutes to
complete.
8. At the end of the system load process, you will be asked to calibrate the touch
screen. Press the arrows and OK button when prompted.
9. Select the language for your system software.
10. Accept the HP license agreement.
11. Your system will complete the installation process and start up your scan and
copy program interface.
ENWW
Install new system software
37