Advanced Options - HP Designjet T1120 SD-MFP Guide De Référence Rapide

Paper series preference
1. Press Options > Basic Options.
2. Select/tick the Paper series fields that represent the paper series you wish
displayed in the size dialogs (Scan Area and Resize). You can select one or
more paper series to display.
Rewind after scan
1. Press Options > Basic Options.
2. Select/tick the Rewind after scan option if you want the document to return
to the paper feed area after it is scanned so that you can eject it backwards
by pressing the paper backward button on the scanner's panel. Leave the
option unselected if you want the document to hang behind the scanner so
that you can eject towards the back with the paper forward button.
Auto reset and inactivity timeout
Press Options > Basic Options.
These two options tell the system to return automatically to default parameters after
a defined idle period—by default, five minutes—so that users will always start with
the system's basic settings even if a previous user has changed them. The system
returns to the saved system parameters: those set when the Options >
Advanced > Save Settings button was last pressed (see below).
Select/tick the Auto Reset option if you want to apply the function. Use Inactivity
Timeout to set the idle time before Auto Reset is triggered.
NOTE: New destinations and media profiles are not affected or lost when Auto
Reset is applied.

Advanced options

Set password for advanced options
Press Options > Advanced Options > Set Password to apply password-
protected access to the Advanced Options dialog.
ENWW
System setup and options
23