HP Designjet T1120 SD-MFP Guide De Référence Rapide page 20

Set and preview the scan area
The preview shows the image inside a white frame. The frame represents the
current Scan Area (input) size. Changing the frame's size before scanning will
change the Scan Area settings. The frame's size can be adjusted by moving its
borders and corners. To do so you can:
●
Drag the resize handles
●
Press with your finger on the place where you wish to reposition the nearest
border edge or corner. The border will jump to that place.
●
Use the image zoom and positioning tools to assist you in setting the frame
size and positioning the image inside of it. The image zoom and positioning
tools are:
Zoom crop: Snaps to the image as cropped by the borders.
Zoom in: Enlarge the image size in the preview. Zooming is targeted on
the center of the window.
Zoom out: Reduce the image size in the preview. Zooming is targeted on
the center of the window.
Zoom all: Displays the whole capture area without cropping. The borders
positions are defined by the current Original size setting.
in the window.
Frame center handle (blue circle): Use this to drag the whole size frame
and reposition it on the captured image.
Press the Start Scan/Copy button
to commit the job.
Press the Cancel button
committing the job.
16 Chapter 2 Basic operations
Image panning tools: Use these arrows to center the captured image
if you want to abort the preview process without
on the frame's sides and corners.
when you are finished previewing and want
ENWW