Corghi AGTT 1600A Manuel D'utilisation page 53

No power supply to the solenoid valve
• Check the solenoid valve's electrical connection
The control lever does not operate the machine
• Contact Technical Assistance
Pump broken
• Replace the pump
Worn connection joint
• Replace the joint
Not enough oil
• Top up the oil
Switch on control lever defective
• Replace the switch
Simultaneous movement of 2 cylinders; a solenoid valve is probably locked
• Clean or replace the solenoid valve
• Contact technical service to adjust the sliding blocks
When turning on the cold machine, quick translation does not work well
• Heat up the oil for a few minutes by moving the machine at a normal speed
WARNING
The "Spare parts" handbook does not authorise users to carry out work on the machine
with the exception of those operations expressly described in the user manual. It only
enables users to provide the technical assistance service with precise information in
order to minimise delays.
Operator's manual AGTT 1600A - AGTT 1600
The machine does not move
no hydraulic pressure
Excessive control unit noise
Jerky movements
Excessive trolley clearance
UK
53