Safety Instructions; Basic Information Concerning Safety; Misuse - Hilti POS 15/18 Mode D'emploi

Horizontal drive
Type
Tripod thread
Tribrach thread
POA 80 battery
Type
Rated voltage
Battery capacity
Charging time
Battery life (with distance / angle measurement every
30 seconds)
Weight
Dimensions
POA 81 AC adapter and POA 82 charger
AC supply
AC frequency
Rated current input
Rated voltage
Weight (POA 81 AC adapter)
Weight (POA 82 charger)
Dimensions (POA 81 AC adapter)
Dimensions (POA 82 charger)
Temperature
Operating temperature range
Storage temperature range
Dimensions and weights
Dimensions
Weight

5 Safety instructions

5.1 Basic information concerning safety

In addition to the information relevant to safety given
in each of the sections of these operating instructions,
the following points must be strictly observed at all
times.

5.2 Misuse

The tool and its ancillary equipment may present hazards
when used incorrectly by untrained personnel or when
used not as directed.
Continuous
5/8''
Li-ion
3.8 V
5,200 mAh
4 h
16 h
0.1 kg (0.2 lbs)
67 mm x 39 mm x 25 mm (2.6" x 1.5" x 1.0")
100...240 V
47...63 Hz
4 A
5 V
0.25 kg (0.6 lbs)
0.06 kg (0.1 lbs)
108 mm x 65 mm x 40 mm (4.3" x 2.6" x 0.1")
100 mm x 57 mm x 37 mm (4.0" x 2.2" x 1.5")
-20...+50°C (-4°F to +122°F)
-30...+70°C (-22°F to +158°F)
149 mm x 145 mm x 306 mm (5.9" x 5.7" x 12")
4.0 kg (8.8 lbs)
a) Never use the tool without having received the ap-
propriate instruction on its use or without having
read these operating instructions.
b) Do not render safety devices ineffective and do
not remove information and warning notices.
c) Have the tool repaired only at a Hilti Service Center.
Failure to follow the correct procedures when
en
9