Indirect Height Measurement; The Principle Of Indirect Height Measurement - Hilti POS 15/18 Mode D'emploi

en
Results
The results are saved in internal memory and can be displayed on a PC or printed out using Hilti PROFIS Layout.

11.8 Indirect height measurement

11.8.1 The principle of indirect height measurement

The indirect height measurement method is used to determine the height difference to inaccessible objects or points
in situations where direct distance measurement is not possible.
Virtually any height or depth, e.g. heights to the extremities of a crane, the depth of an excavation or heights in many
other similar situations can be determined using the indirect height measurement method.
NOTE
It is essential that the reference point and the other inaccessible points all lie in the same vertical plane.
76
Return to project selection.
Delete the last measured point.
Initiate measurement to point.
Show the result of area meas-
urement.
Return to project selection.
Save the results of area meas-
urement.