Introduction; Fitting Guidelines; Specification - Carbest CARA-MOVE II Manuel D'utilisation

Introduction

Thank you for choosing this caravan mover. This product has been produced according to high
standards and has undergone careful quality control procedures. Simply by using the remote control
you can move your caravan effortlessly into any position required within operating guidelines.
Before proceeding with installation and starting to use the mover, please read this manual
very carefully and be aware of all the safety instructions! The owner of the caravan will
always be responsible for correct use. Keep this manual inside your caravan for future
reference.
This User Manual covers the Cara-Move II Mover with Smart Electronics system. The mover system
consists of two 12V motor-powered rollers, a 12V electronic control box and a remote control. To
function, the motor-powered rollers must be engaged against the tyres of your caravan. The remote
control handset enables you to simultaneously engage the rollers of both movers. Once this is done
the mover is ready for operation. The remote control will allow you to move your caravan in any
direction.

Fitting Guidelines

The chassis clamps provided with this system are suitable for fitting onto most standard caravan
chassis that have an L-shape or U-shape profile (Fig.7). Please refer to Fig.3 for reference on
dimensions and clearances BEFORE you proceed any further with installation. If your chassis has
different dimensions to those shown in Fig.3 then various chassis clamp adapters are available to suit
the majority of UK and Continental caravans; please refer to the section of this manual entitled
'Optional Fitting Adapters'.

Specification

Operational Voltage
Average Current Consumption
Maximum Current Consumption
Maximum Safe Working Load (SWL)
Minimum Width (caravan/trailer)
Maximum Width (caravan/trailer)
Power Source (caravan leisure battery)
Model Name
Model Number
25 Ampere (approx)
30
Cara-Move II
920209
12 Volt DC
100 Ampere
2500kg
1800mm
2500mm
12V