Operation - Handset Functions - Carbest CARA-MOVE II Manuel D'utilisation

Operation - Safety Guidelines
DO always apply the handbrake after manoeuvring, before disengaging the drive rollers from the tyres.
DO NOT rely on the mover to act as a brake.
DO NOT exceed the stated maximum Safe Working Load (SWL).
DO NOT attempt to move or tow your vehicle with the motor movers engaged on the wheels.
DO NOT make any modifications on the caravan mover (mechanical or electronically). This can be
very dangerous! No warranty claim will be accepted and we cannot guarantee the function of the
mover if any modifications are made. Reimo Reisemobil-Center GmbH are not liable for any damage
whatsoever caused as a result of incorrect installation, operation or modification.
Always ensure that you are close enough to engage the caravan's handbrake, particularly
when manoeuvring on uneven terrain and gradients/slopes, in case of mechanical failure. Do
not use the mover as a brake, when you have finished manoeuvring always engage the
caravan's handbrake.
Warning! Ensure that there are no persons or obstructions in the vicinity of the caravan prior
to use.
If in doubt regarding any feature of the mover system and its operation, contact your mover
dealer.

Operation - Handset Functions

Using Fig.10 for reference, familiarise yourself with the layout of the Remote Control Handset (5).
Fig.10.A = Handset Display
Fig.10.B = Directional Thumb Stick
The Remote Control handset (5) is powered by two 'AA' 1.5V batteries, to install these slide off the
end case (Fig.10.D) of the handset as seen in Fig.11. Ensure only leak proof batteries are used.
Check with local authority regarding the correct disposal of used batteries. Remove batteries from
handset during long periods of inactivity.
Turn on the handset by double pressing the Multi-function button (Fig.10.C). Once activated the
display (Fig.10.A) will illuminate. If the handset has not been used 60 seconds it will power off. Fig.17
below shows the various symbols used on the display.
A
B
E
Fig.10.C = Multi-function Button
Fig.10.D = End Case
Fig.17
F
C
D G
46
H