Introduction; Fitting Guidelines; Specification - Carbest Cara-Move Manuel D'utilisation

Déménageur de caravane
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 80

Introduction

Thank you for choosing this caravan mover. This product has been produced according to high
standards and has undergone careful quality control procedures. Simply by using the remote control
you can move your caravan effortlessly into any position required within operating guidelines.
Before proceeding with installation and starting to use the mover, please read this manual
very carefully and be aware of all the safety instructions! The owner of the caravan will always
be responsible for correct use. Keep this manual inside your caravan for future reference.
This installation manual covers Cara-Move. The mover system consists of two 12V motor-powered
rollers, a 12V electronic control box and a remote control. To function, the motor-powered rollers must
be engaged against the tyres of your caravan. The cross actuation system enables you to
simultaneously engage the rollers of both movers. Once this is done the mover is ready for operation.
The remote control will allow you to move your caravan in any direction.
This electronics installation and User Manual covers the steps required to electrically wire your Basic
electronics to your given caravan movers. On auto-engage mover models, the remote control handset
enables you to simultaneously engage the rollers of movers in any given setup. Once engaged, your
handset will allow you full directional control of your caravan, providing accurate manoeuvring and
features such as on the spot rotation (single axle mode only).

Fitting Guidelines

The chassis clamps provided with this system are suitable for fitting onto most standard caravan
chassis that have an L-shape or U-shape profile (Fig.11). Please refer to Fig.13 for reference on
dimensions and clearances BEFORE you proceed any further with installation. If your chassis has
different dimensions to those shown in Fig.13 then various chassis clamp adapters are available to
suit the majority of caravans; please refer to the section of this manual entitled 'Optional Fitting
Adapters'.

Specification

Operational Voltage
Average Current Consumption*
Maximum Current Consumption **
Approx Net Weight (inc. all fixings & accessories)
Safe Working Load (SWL) Twin Motor/Quad Motor
Minimum Width (caravan/trailer)
Maximum Width (caravan/trailer)
Power Source (caravan leisure battery)
* Average Current Consumption readings when using an approx. 1100Kg single axle caravan on a
hard, level surface.
** Maximum Current Consumption readings when using an approx. 1100Kg single axle caravan
ascending a 1:4 (25%) gradient.
Model Name
Model Number
Speed
25 Ampere (approx)
12cm per sec. (approx)
34
UK
Cara-Move
920208
12 Volt DC
76 Ampere
35 Kg
2250Kg/3500Kg
1800mm
2500mm
12V

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

920208

Table des Matières