Destined Use - Pfaff HTH-E SILVERLINE Mode D'emploi

Hydraulic Lifting Table HTH-E SILVERLINE
English
Before taking into operation, please carefully read this operating instruction!
Observe the safety instructions!
File documentation!
The type- and test number (name plate) fixed to the lifting table are required for exact identification of the lifting
table. Therefore, we request you to state test and type number as well as year of manufacture in case of
questions or spare parts orders.

Destined use

The hydraulic lifting table is a power operated lifting platform for lifting and lowering of loads suitable for
integration in a complete machine or lifting device that is not fully functional until installed in a building or
structure.
The manufacturer of the complete machine is responsible for carrying out a hazard assessment and
determining conformity with EC-directives.
The lifting table is not suited for:
trespass to the lifting platform

transportation of people on the platform

use as working platform

Not suitable in hazardous location.
Not suitable for use in corrosive atmosphere
Alterations to the hydraulic lifting table or fitting of accessories are only allowed with our written
approval.
Pay attention to the technical data and functional description!
Without an extended hazard analysis / type approval, standard lifting tables in compliance with
EN 1570-1 must not be used as:
Permanently installed lifting tables that are equipped with a cabin and that approach predefined levels of

a building;
Permanently installed lifting tables with a vertical lift of over 2.0 m that are not equipped with a cabin and

that approach predefined levels of a building;
Power-driven lifting platforms for handicapped people;

Lifting tables as ground devices for aviation;

Lifting tables to be used on ships;

Mobile aerial work platforms;

Vehicle lifting platforms (for vehicle maintenance);

Mobile lifting tables for fire fighting;

Mobile lifting tables to be used as forklifts, forklift trucks or picking elevation trucks;

Mobile lifting trucks with a speed of more than 1.6m/s;

Shelf access equipment;

Lowering and lifting devices on stages.

The manufacturer of the complete system is responsible for carrying out a hazard
assessment or type examination test in compliance with Appendix IV of the Machinery
Directive if the lifting table is used (installed) where there is a fall height of over 3 m.
The lifting table is not suitable for use in the following cases.
Operation under difficult conditions (e.g. extreme climate, operation in freezer areas, strong magnetic

fields);
Operation to which special regulations apply (e.g. explosive atmospheres, mines);

Handling loads whose properties can lead to hazardous situations (e.g. molten metals, acids, radioactive

materials, particularly brittle loads);
Hazards arising during manufacture, transport and mounting;

Installations to be attached to the load platform or that replace this;

Installation into systems or machines, controls with more than 2 control stations etc.;

Wireless controls;

technische Änderungen vorbehalten design changes under reserve
F 06.08.151
changements techniques sous réserve
14