Last Number Redial; Programming Memory Numbers; Calling A Memory Number; Babycall - Topcom Cocoon 85 Mode D'emploi

Cocoon 85/95
This function has to be programmed before it can be used
(see 4.17 Automatic answering).

4.3 Last number redial

• P ress the Redial button
d i s p l a y.
• Press the Line button. The number will be dialled automatically.
• Press the Line button when you want to terminate the call.

4.4 Programming memory numbers

You can program 10 indirect numbers (of max. 24 digits) in the phone's
m e m o ry.
• Press the Set button
• Enter the memory location (0-9).
• Enter the telephone number you wish to save on this memory
location.
• Press the Memory button
Remarks :
• All memory numbers will be erased when the default settings have been reset
(see 4.18).
• If you wish to insert a pause, press the Redial button
where you want a pause.

4.5 Calling a memory number

• Press the Line button
• Press the Memory button
memory location (0-9).
• The memory number will be dialled automatically.
• Press the Line button

4.6 Babycall

This function allows you to program one specific number (memory location
0) that will be dialled automatically no matter what key has been pre s s e d ,
except for the Set button. To activate this function, do the following :
• Press the Set button
• Press numerical button '6'.
• Press numerical button '1' to activate/deactivate this function.
• Press the Memory button
Default setting : not activated
Important : Memory number [0] has to be programmed for this function. This
function is not valid when "mem 0" is not programmed.
. The last number dialled appears on the
, followed by the Memory button
. You will hear a confirmation tone.
.
, followed by the number of the
when you want to terminate the call.
.
. You hear a confirmation tone.
29
.
on the location