COCOON 115
5 OPERATION TELEPHONE
5.1
Outgoing calls
5.1.1 Making a phone call
•
Press the Line button
•
Enter the desired telephone number.
•
Press the ON-hook button
5.1.2 Call setup with dial preparation
•
Enter the desired telephone number. An incorrect number can be corrected by means of
the Mute button
you've already entered will disappear and the handset returns to stand-by mode.
•
Press the Line button
•
Press the ON-hook button
5.2 Incoming calls
•
When a call comes in, only the handset will start to ring. The PHONE symbol
on the display and the Line indication (LED)
•
Press the Line button
•
When you pick up the handset from the base unit you are immediately connected to the
caller. You do not need to press the Line button
before it can be used (see 5.14 Automatic answering).
5.3 Last number redial
•
Press the Redial button
•
Press the Line button
•
Press the On-hook button
5.4 Programming memory numbers
You can program 10 indirect numbers (of max. 24 digits) in the phone's memory.
•
Press the Set button
•
Enter the memory location (0-9).
•
Enter the telephone number you wish to save on this memory location.
•
Press the Memory button
Remarks:
•
All memory numbers will be erased when the default settings have been reset
(see 5.15 Default settings).
•
If you wish to insert a pause, press the Redial button
you want a pause (see also '5.16 Setting the pause length').
5.5 Calling a memory number
•
Press the Line button
•
Press the Memory button
•
The memory number will be dialled automatically.
•
Press the On-hook button
5.6 Mute function
It is possible to deactivate the microphone during a conversation. Now you can speak openly
without being heard by your correspondent.
. You will hear the dial tone.
when you want to terminate the call.
. When you haven't pressed a button for 20 seconds, the number
. The number will be dialled automatically.
when you want to terminate the call.
to answer the incoming call.
. The last number dialled appears on the display.
. The number will be dialled automatically.
when you want to terminate the call.
, followed by the Memory button
. You will hear a confirmation tone.
.
, followed by the number of the memory location (0-9).
when you want to terminate the call.
will blink on the base.
. This function has to be programmed
.
/P on the location where
7
blinks