Battery Empty Indication; Telephone Operation; Outgoing Calls; Incoming Calls - Topcom COCOON 95 Mode D'emploi

3 BATTERY EMPTY INDICATION

When the battery is empty, the handset no longer carries out operations. When a battery is
completely empty and you have put the handset on the base unit for a short period of time,
the Battery symbol will appear to be fully charged but this is actually not the case. The battery
capacity will decrease rapidly. We advise you to put the handset on the base unit for the entire
night so that it can be recharged thoroughly.
• Full battery
• Empty battery
When you are in the middle of a conversation and the battery is almost empty, the handset
will emit a warning signal every 8 seconds. After 2 minutes the handset will be deactivated.
Place the handset on the base unit to charge (the keypad upwards).

4 TELEPHONE OPERATION

4.1

OUTGOING CALLS

4.1.1 Making a phone call
• Press the Line button
• Enter the desired telephone number.
• Press the Line button
4.1.2 Call setup with dial preparation
• Enter the desired telephone number. An incorrect number can be corrected by means of
the Mute button
you've already entered will disappear and the handset returns to standby mode.
• Press the Line button
• Press the Line button
4.2

INCOMING CALLS

• When a call comes in, only the handset will start to ring. The PHONE symbol
on the display.
• Press the Line button
• When you pick up the handset from the base unit you are immediately connected to the
caller. You do not need to press the Line button
before it can be used (see "4.17 Automatic answering").
4.3

LAST NUMBER REDIAL

• Press the Redial button
• Press the Line button
• Press the Line button
Topcom Cocoon 95
. You will hear the dial tone.
when you want to terminate the call.
. When you haven't pressed a button for 20 seconds, the number
. The number will be dialled automatically.
when you want to terminate the call.
to answer the incoming call.
. The last number dialled appears on the display.
. The number will be dialled automatically.
when you want to terminate the call.
Topcom Cocoon 95
. This function has to be programmed
blinks
9