Mute Function; Setting The Volume; Paging; Handset Lock - Topcom Cocoon 85 Mode D'emploi

Cocoon 85/95

4.7 Mute function

It is possible to deactivate the microphone during a conversation. Now
you can speak openly without being heard by your correspondent.
• Press the Mute button
be deactivated. The MUTE symbol
• P ress the Mute button
c o n v e r s at i o n .

4.8 Setting the volume

During a conversation you can set the volume by pressing the Set
button . The indication 'Loud Hi/Lo' appears on the display.

4.9 Paging

When you press the Paging button on the base unit, the handset emits a
ringing signal for 1 minute. This signal helps you find a lost handset. The
symbol blinks on the base unit. The message "PAGE" appears on the
display.

4.10 Handset lock

When a particular number has been locked, every phone number, start i n g
with this number, will be blocked and cannot be called.
• Press the Set button
• Press numerical button '8'.
• Enter the 4 digit PIN code (default 0000).
• Enter the number you want to lock (max. 3 digits). You can erase a
digit by means of the Mute button
• Press the Memory button
Default setting : no handset lock.
As soon as you dial the blocked number, "B A R R I N G" is shown on the
d i s p l a y. To remove a blocked number, follow the same instructions but
erase the blocked number by pressing the Mute button

4.11 Keypad lock

When the keypad is locked, the keypad buttons can no longer be pre s s e d ,
except for the Set button
• Press the Set button
• Press numerical button '7'.
• ' ' and 'Hold' are shown on the display.
Default setting : no keypad lock.
Follow the same instructions to deactivate this function.
during a conversation. The microphone will
appears on the display.
again when you want to continue the
.
.
. The unit emits a confirmation tone.
.
.
30
.