Battery Empty Indication; Operation Telephone; Outgoing Calls; Making A Phone Call - Topcom Cocoon 85 Mode D'emploi

Cocoon 85/95

3 BATTERY EMPTY INDICATION

When the battery is empty, the handset no longer carries out operations.
When a battery is completely empty and you have put the handset on the
base unit for a short period of time, the Battery symbol will appear to be
fully charged but this is actually not the case. The battery capacity will
d e c rease rapidly. We advise you to put the handset on the base unit for the
e n t i re night so that it can be re c h a rged thoro u g h l y.
• Full battery [
• Empty battery [
When you are in the middle of a conversation and the battery is almost
empty, the handset will emit a warning signal every 8 seconds. After
2 minutes the handset will be deactivated. Place the handset on the base
unit to charge (the keypad upwards).

4 OPERATION TELEPHONE

4.1 Outgoing calls

4.1.1 Making a phone call

• Press the Line button
• Enter the desired telephone number.
• Press the Line button

4.1.2 Call setup with dial preparation

• Enter the desired telephone number. An incorrect number can be
corrected by means of the Mute button
pressed a button for 20 seconds, the number you've already entered
will disappear and the handset returns to standby mode.
• Press the Line button
• Press the Line button

4.2 Incoming calls

• When a call comes in, only the handset will start
to ring. The PHONE symbol
• Press the Line button
• When you pick up the handset from the base unit you are immediately
connected to the caller. You do not need to press the Line button
]
]
. You will hear the dial tone.
when you want to terminate the call.
. The number will be dialled automatically.
when you want to terminate the call.
blinks on the display.
to answer the incoming call.
28
. When you haven't
.