HANDL. B1200C/1210C
Butler 1200C/1210C
• Press the Programming key
• 'PIN' appears on the display.
• Enter the 4-digit PIN code of the base unit (default PIN code is '1590'). Use the number keypad.
• Press the Programming key
• The handset is subscribed to the base unit.
4.4 Making Calls
4.4.1 External Call
• Press the Line key
• The Line/Charge indicator
appear on the display.
• You will hear the dial tone. Dial the telephone number you wish to call.
• The number appears on the display and is dialled.
• After finishing your call, press the Line key
base unit.
4.4.2 Number preparation
• Dial the telephone number you wish to call. You can correct the number by pressing the
Delete/Mute key
• Press the Line key
• The Line/Charge indicator
appear on the display.
• The telephone number is dialled automatically.
• After finishing your call, press the Line key
base unit.
4.4.3 Redialling the last number dialled
• Press the Line key
• The Line/Charge indicator
appear on the display.
• You will hear the dial tone.
• Press the Redial key
re-enter the number.
4.4.4 Redial one of the last 5 numbers dialled
• Press the Redial key
to dial one of the last 5 numbers dialled, press the Redial key
desired number appears on the display.
• Press the Line key
• The number shown on the display is dialled automatically without you having to re-enter
the number.
• After finishing your call, press the Line key
base unit.
All manuals and user guides at all-guides.com
30-03-2001
08:32
.
.
.
(LED) on the base unit will blink. 'EXT' and the Call symbol
.
.
(LED) on the base unit will blink. 'EXT' and the Call symbol
.
(LED) on the base unit will blink. 'EXT' and the Call symbol
. The number you last called is dialled automatically without having to
. The number you last called appears on the display. If you would like
.
51
Page 51
to hang up or put the handset back on the
to hang up or put the handset back on the
a few times until the
to hang up or put the handset back on the