Electrical Connection; Initial Configuration - Palazzetti CALDAIA A PELLET JP Notice D'installation Et D'entretien

6.5 Electrical connection

Simply connect the appliance to the electrical
system using the supplied plug (Fig. 24).
The electrical connection (plug) must be easily
accessible after appliance installation as well.
If the power supply cable is damaged
it must be replaced by the technical
assistance service or a qualified techni-
cian in order to prevent any risk.
It is mandatory that the system is
equipped with an earth connection
and a differential switch in compliance
with the laws in force.
The flue gas evacuation duct must
be equipped with its own earth
connection.
004778300 ­ 14/09/2020
ITALIANO ENGLISH
Fig. 23
Fig. 24
DEUTSCH
7

INITIAL CONFIGURATION

Depending on the type of installation it is neces­
sary to set up the ideal configuration for correct
operation.
It is possible to choose from four different
configurations:
Description
Room thermostat
Room probe (default)
Storage tank with
serpentine
Storage tank without
serpentine
FRANÇAIS ESPAÑOL
Configuration
1
2
3
4
45