Technical Specifications - afx light LMH430Z Manuel D'utilisation

Thank you for purchasing this moving head. Please read user guide for safety and operations information before using
the product. Keep this manual for future reference. Please check the attachments listed on the page after opening the
carton. In the event of carton damage or attachment missing in transit, please contact your dealer or our after sales
service department.
CONTENTS OF THE CARTON
ð 1x LMH430Z
ð 1x power cable
ð 1x User's manual

Technical specifications

Voltage: ............................................................................... AC90-240V, 50Hz
Led : ............................................................................................ 18x 9W RGB
Pan: ......................................................................................................... 585°
Tilt: ........................................................................................................... 315°
Beam angle: ....................................................................................... 15° - 35°
Led lifetime: ................................................................................. 50000 hours
Control mode: ..................................... Sound control/auto/DMX/Master-slave
DMX channel: .............................................................................................. 15
Wattage:.... ..............................................................................180W
Dimensions:.... ...........................................................260x260x300mm
Weight:.. ................................................................................................. 5,5Kg
For indoor use only
Warning
ð Do not expose the human eye direct to led beam.
ð Do not turn on and off the unit frequently.
ð Before using this unit make sure the power supply is grounded.
ð This unit is intended for indoor use only and should be kept away from water, moisture and shakes. The working
temperature of this unit is 18-30°C, do not run it continuously.
ð Use a cleaning tissue to remove periodically the dust on the external lenses to optimize light output.
ð Always replace with the exact same type fuse, replacement with anything other than the specified fuse can cause
fire or electric shock and damage your unit, and will void your manufactures warranty.
ð Unplug the unit from the mains prior to cleaning or repairing it.
ð All repairs must be carried out by a qualified technician. Do not try to repair the unit yourself. It doesn't contain any
user serviceable parts.
ð Do not use the unit if the mains lead is damaged. A damaged mains lead must be immediately replaced by a
qualified electrician. Do not try to replace the mains lead yourself.
DMX512 connexion
1. Install the units in a suitable position (laying or appending).
2. Use standard XLR microphone cable chain your units together via the XLR connector on the rear of the units. For
longer cable runs we suggest a terminator at the last fixture ( put
3. Assign a DMX address to each the unit.
4. Turn on all units' power, the units begins reset, then the unit begins working.
5. Use DMX console to control your units.
©Copyright Lotronic 2012
GB
a 120ohm resistance between PIN1 and PIN2 )
LMH430Z