Reverse Pan
Use Menu button until RP-- ( RPON or RPOF ) will be display
Use Up and Down buttons to choose one of these options. If you choose RPOF, the Pan move will be to forward rotating. If you choose RPON, the Pan move will be
reverse rotate. Press ENTER to validate your choice
Press Menu button to back to the previous menu
Reverse Tilt
Use Menu button until RT-- ( RTON or RTOF ) will be display
Use Up and Down buttons to choose one of these options. If you choose RTOF, the Tilt move will be to forward rotating. If you choose RTON, the Tilt move will be
reverse rotate. Press ENTER to validate your choice
Press Menu button to back to the previous menu
Reverse Display
Use Menu button until RD-- ( RDON or RDOF ) will be display
Use Up and Down buttons to choose one of these options. If you choose RDOF, the readout display will be to non-inverting. If you choose RDON, the readout display
will be reverse rotate. Press ENTER to validate your choice
Press Menu button to back to the previous menu
Factory Output Setting
Use Menu button until DF-- ( DFON or DFOF ) will be display
Use Up and Down buttons to choose one of these options. If you choose DFOF, the setting will be the one you set. If you choose DFON, the setting will be the factory
setting. Press ENTER to validate your choice
Press Menu button to back to the previous menu
PS : The default output setting is : DMX address code A001, Pan is positive rotating, Tilt is positive rotating and Display readout is normal display.
Master/Slave operate
This moving head can be used in master or slave mode. The master unit must be in sound mode or Auto mode
For the slave unit, press Menu button until A--- ( DMX mode ) will be display. After use Up and Down button to set DMX address to A001 then press Enter button to
save your choice
In master/slave mode, The slave units works in same time of the master unit ( same moves, same effect,... )
In this mode, you can link up to 32 units together
Press Menu button to back to the previous menu
©Copyright Lotronic 2012
LMH430Z