Removal; Electrical Control Unit - Burkert 2730 Manuel D'utilisation

Type 2730 / 2731 / 2731K
Electricalcontrolunit
7.5

Removal

DANGER!
Risk of injury from discharge of medium and pressure!
It is dangerous to remove a device which is under pressure due to
the sudden release of pressure or discharge of medium.
▶ Before removing a device, switch off the pressure and vent the
lines.
Procedure:
→
Loosen the pneumatic connection.
→
Remove the device.
NOTE!
Deformation of the diaphragm!
▶ For prolonged storage of the valves, slacken the housing screws.
8 ELECTRICAL CONTROL UNIT
The valve Type 2730 / 2731 / 2731K can be combined with fol-
lowing control units:
• Type 8630 Positioner TopControl Continuous
• Type 8635 Positioner SideControl
• Type 8692 Positioner TopControl
• Type 8694 Positioner TopControl Basic
• Type 8792 Positioner SideControl
• Type 8693 Process controller TopControl
• Type 8793 Process controller SideControl
The electrical connection of the control unit is described in
the respective operating instructions for the control unit.
english
21