Removal; Electrical Control Unit - Burkert 2103 Manuel D'utilisation

8.9

Removal

DANGER!
Risk of injury from discharge of medium and pressure!
It is dangerous to remove a product which is under pressure due
to the sudden release of pressure or discharge of medium.
▶ Before removing a product, switch off the pressure and vent the
lines.
Procedure:
→
Loosen the pneumatic connection.
→
Remove the product.
Replacement of the diaphragm is described in the chapter
entitled "11 Repairs".
34
english
Type 2103, 2104, 2105
Electricalcontrolunit
9 ELECTRICAL CONTROL UNIT
The valve Type 2103, 2104 and 2105 can be combined with fol-
lowing control units:
• Type 8690 Pneumatic Control Unit
(actuator size ∅ 70 - ∅ 130)
Control head (actuator size ∅ 70 - ∅ 130)
• Type 8691
Control head (actuator size ∅ 50)
• Type 8695
• Type 8692 Positioner
(actuator size ∅ 70 - ∅ 130)
• Type 8693 Process controller
(actuator size ∅ 70 - ∅ 130)
• Type 8694 Positioner
(actuator size ∅ 70 - ∅ 130)
Positioner (actuator size ∅ 50)
• Type 8696
• Type 8645 Automation system FreeLINE
• Type 6012 Pilot valve
• Type 6014 P Pilot valve
The electrical connection of the pilot valve or the control is
described in the respective operating instructions for the
pilot valve/control.