Maintenance; Emergency Stop - Agilent Technologies TV 551 Notice De Mode D'emploi

Emergency Stop

To immediately stop the TV 551/701 SEM Navigator in an emergency
condition it is necessary to remove the supply cable from the mains
plug.

Maintenance

The TV 551/701 SEM Navigator does not require any maintenance.
Any work performed on the system must be carried out by
authorized personnel.
Before carrying out any work on the system, disconnect it from the mains,
WARNING!
vent the pump by opening the appropriate valve, wait until the rotor has
stopped turning and wait until the surface temperature of the pump falls
below 50 °C.
In the case of breakdown, contact your local Agilent service center
who can supply a reconditioned system to replace that broken down.
Before returning the system to the constructor for repairs, or replacement with a
NOTE
reconditioned unit, the "Health and Safety" sheet attached to this instruction
manual must be filled-in and sent to the local sales office. A copy of the sheet
must be inserted in the system package before shipping.
If a system is to be scrapped, it must be disposed of in accordance
with the specific national standards.
TV 551/701 SEM Navigator User Manual / 87-900-958-01(G)
Instructions for Use

Maintenance

205/276
16