Steba PS E2600 XL Mode D'emploi page 21

Troubleshooting
Dear Client,
Thank you for buying this STEBA product. The following table will help you with pro-
blems that may occur when using your device. For many problems there is a simple
solution, because not everything that appears like a malfunction must be serious.
Please check the following list before contacting our customer service.
Problem Reason
Heavy ∙ Food touches the radiator
forma- ∙ Food smokes without contact
tion of to the radiator
smoke
Device ∙ Device is not plugged in
does not ∙ Device is not switched on
work ∙ Set time has expired
∙ Micro fuse on the rear has trig-
gered
∙ Device is overheated
Device is ∙ Stainless steel frame is not
very hot inserted
∙ Fan is blocked
∙ Ventilation slots are blocked
Error ∙ Temperature sensor does not
code work
"E01"
Error ∙ The heating process has not
code been completed within 10 min-
"E02" utes and has been cancelled.
Possible causes: strong wind,
cold environment
Error ∙ Device is warmer than 50°C in
code the area of the electronics and
"Err/Hot" turns off
Solution
∙ Place the food into the correct
level
∙ Interrupt the grilling. Is the
food burned or not suitable for
grilling?
∙ Plug it in
∙ Check fuse
∙ Press the on/off switch on the
rear
∙ Restart device
∙ Have the fuse replaced by a
specialist
∙ Let the device cool down
∙ Let the device cool down and
insert the frame
∙ Remove blocking objects
∙ Clean the ventilation slots
∙ Contact service
∙ Press the button again, the
display is set to the normal
position
∙ If the error is repeated under
normal conditions, another er-
ror has occurred. Please contact
service
∙ Is the lower resting tray in-
serted?
∙ Allow the device to cool down
and restart
21