Substitution Of The Led Bar - Sirius SU1 Notice D'utilisation Et D'entretien

(If in doubt, call 866.528.4987)
FOR SU1 – SUE1 - SU2 - SU3 - SUE3 -
SU10 - SU22 - SU54
To replace the round LED lamps (fig.20) you
have to check first if it is possible to access
the back side of the lamp with your hand.
If it is possible to access the back side of the
lamp, you have to: insert your hand , push at
the same time both support wings of the
lamp, push to remove the lamp.
If it is not possible to access the back side of
the lamp, you have to: provide yourself with
a sharp utensil, insert the utensil between the
lamp and the stainless steel frame (on the
side where the little support wings are pla
ced), push to remove the lamp from the coo
ker hood.
fig. 19
FOR SU92

Substitution of the LED bar:

Using an appropriate tool, remove the LED
bar from its seat (refer to Fig. 21), disconnect
it electronically using the appropriate con-
nector then substitute it with a LED bar with
same characteristics.
fig. 20
15