User Setup - Steinberg Systems SBS-KW-1000B Mode D'emploi

Viewing the accumulated weight
 To view the accumulated weight, press
mode".
The display flashes the accumulated weight.
- if the accumulated weight is zero, the scale will display
Press or , to view high 5-digital and low 5-digital.

Press or , to exit View mode.

Deleting accumulated weight
To delete the last accumulated weight, press

displays, indicating that you deleted the last accumulated weight. The
delete function only deletes the last weight.
- if you already deleted the last weight, the scale displays
You can add loads as long as you don´t overload the scale (watch up

the maximal capacity in case you´re using the function combined with
the TARE function)
EN
Clearing all weight
 TO CLEAR ALL WEIGHTS, PRESS
displays, indicating all weights are cleared.
7) UNIT SWITCH
You can switch between the units kg, lb or even set your own unit (USR)
To switch the unit, press

When the scale switches to kg,
When the scale switches to lb,
When the scale switches to USR,
-The unit switch changes the unit temporarily. The scale does not
save the unit unless the system unit is changed.
For information about User Unit , refer to the corresponding information under
"Scale configuration "
8) RESOLUTION SWITCH
A high resolution offers a better accuracy, but at the cost of a longer measu-
ring time and stricter requirement of load's stability. Designed to meet the
OIML R76's directive, the scale has the best (default) performance at 2000
to 3000 division.
to enter the "View
.
OR , AND THEN PRESS
or , and then press .
displays.
displays, and the indicator lb lights on.
displays, and the indicator lb lights off.
31
Rev. II.2017
Press or

The scale displays new resolution.
-The resolution switch changes the apparent overloading range
of scale. For example, if a 3000*1kg scale is switched to 3000*0.5kg, it
will overload at 3004.5kg (3000 + 9*0.5), while by default, it overloads
at 3009kg (3000 + 9*1).
The default resolution will be restored the next time when scale is

powered on or by entering the User Setup. To save the changes in
resolution for later, enter User Setup and change Resolution.
9) BATTERY POWER VIEW
Press or

The scale displays the battery voltage, for example,
II.USER SETUP
The user setup enables you to fix several functions of the scale so that it
better fits your expectations by using it. The different parameter can be de-
termined one after another.
Entering the user setup
.
Press or

mode.
Message displays.
Press or

1) RESOLUTION
The scale displays the resolution to be set. For example,
the current resolution is set to 0.5.
Press or

Press or

save.
Designed to meet the OIML R76's directive, the scale has the best (default) per-
formance at 2000 to 3000 division.
Press or

2) AUTO-OFF TIME
The scale displays auto-off time, e.g.
turn off after 15min. The Auto-Off time can be set to: 0 (never auto-off ),
5min, 15min, 30min, 60min.
Rev. II.2017
, and then press to switch the display resolution.
, and then press to view the battery power.
, and then press or to enter the User Setup
to enter the Resolution setup.
, and to change the resolution.
, to exit without saving. Press
to enter the Auto-Off setup.
, indicating that the scale will
32
indicating 6.38V.
EN
indicating that
or to exit and