Steinberg Systems SBS-KW-1000B Mode D'emploi page 16

REMOTE CONTROL
key name Correspondence with
main display key
EN
Zero same as
Tare same as
Hold same as
Acc
Del
F1
View
off same as
2nd same as
function 1 function 2 Specifications
zero scale with , unit switch increase digital
tare in/out with , tare set right scroll digital
lock/unlock with , enter User Setup confirm
a c c u m u l a t e with , switch resolution decrease digital
weight
delete last with , clear all weight left scroll digital
weight
view accumu- with , view battery
lated weight power
NC
lock/unlock with , enter User Setup confirm
2nd function with , enter Password exit and save
mode
27
DISPLAY MESSAGES BY NORMAL USE
message
I. OPERATION
1) TURN ON THE SCALE
 Press
The scale performs initialization and boot-up testing, then the display flashes 3
times, and shows the max. capacity and the battery power. It will then detect, if
necessary, the weight hanging on the scale and Auto-Zero.
2) TURN OFF THE SCALE
 Press
The scale displays the battery power and an off message (
Rev. II.2017 Rev. II.2017
stands for note
weight over range
detect weight
weight below range
SETUP User Setup
END save and exit
OFF power off
OVerLoaD overload, exceeds 100% F.S. + 9e
2ND 2nd function
HOLD scale is locked
UNSTaBle load not stable
TARE scale is tared
UNit KG kg
UNit LB lb
UNit USeR User Unit
INVaLiD invalid operation
ACCumulate accumulate weight
no ACCumulate no weight accumulated
NO DELete no weight deleted
DELete delete last weight
CLEAR delete all weight
Password Password mode
for 1sec, to turn the scale on.
or for 1sec to turn the scale off
28
EN
), and turns off.