Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5. Battery Charging
1. Lithium Battery (self contained)
a)
Open the scale back cover to connect the charger adaptor.
And then connect the power for the adaptor.
b)
When the lithium battery is fully charged, the indicator on the charger
adaptor is changed from color red (during the charging process) to green,
indicating the completion of the charge process.
c)
For optimized charging efficiency, it is recommended that the charging to
be done with the scale turned Off. According to the lab testing results,
with a fully charged 7.4V/2AH lithium battery, LED series scale can
operate over 20 hours and LCD series scale 40 hours
(without backlighting).
d)
For optimal battery life time, it is recommended to charge the battery
for every 12-hour of scale operation.
2. Nickel – H Battery
a)
Insert the rechargeable batteries into the charger. Connect the power
to the charger and following the instruction of the Nickel-H battery
charger.
6. Precaution
EN
1. The alkaline batteries with the Standard Option are not rechargeable battery.
Do not attempt to charge them.
2. Customer can select either the 7.4V/2AH high power lithium rechargeable
battery with DC8.4V/800mA charger or the 4 Nickel-H rechargeable
battery/charger packages. Please do not use the rechargeable battery
package other than those provided. The use of third party
product may void any guarantee.
3. For weighing operation, please load the scale with weight load exceeding
the scale's maximum capacity.
4. Perform routine inspection and maintenance to ensure operation safety
for these basic items:
a)
Check for loose bolts.
b)
Check hook and shackle for deformation, wearing and tearing.
c)
Check other scale component for signs of metal fatigue.
d)
Check for missing hook latch.
e)
Avoid hitting, bumping the display window.
f)
Do not use the scale in the rain or heavily polluted environment - not
applicable for the scale SBS-KW-300KE WR.
g)
Please remove the AA battery when scale is not used for extended
period of time.
For problem "a" through "d", please stop using the scale and send it back to
authorized dealer or for repair or replacement of problem parts.
12
Rev. 26.08.2020
CALIBRATION METHOD
Please do not attempt to calibrate the scale without standard weight.
Step
Operation
Display
1
Press and Hold
SPEN
Key to power on
2
Press key
SET
0000
3
Press
key to add.
150.000
Press
key to move the
digit left.
4
Press
HOLD
5
150.000
SETUP FUNCTIONS IN SUB-MENU
Function
Operation
Turn on/off the weigh
Press
stable alarm beep
key during the scale self-
check sequence
„9......0" to enter the
sub-menu.
Unit change between kg
Press
and lb
LCD backligting
Press
-------------
Press
Rev. 26.08.2020
Remarks
Enter
the
calibration
procedure.
should be with no load.
Confirm zero point, when stable, display
„0000"
Load the scale. The closer to full capacity
the better. For example 150 kg.
To store the result once weighing becomes
stable.
System goes back to weighing mode after
several seconds.
Display
Remarks
bEE 0
Press
key to toggle the setup.
Off = „0"
On = „1"
Cht 0
Press
to change
kg = „1"
Lb = „0"
Aut 0
Press
„0" for manual
„1" for auto
------------
Automatic re-start
13
Scale
EN
Publicité
Table des Matières
