Repair; Accessories - Festo ELGA-TB-G Notice D'utilisation

ELGA-TB-G/-RF(-F1)
To check the toothed belt at ELGA-TB-RF-F1:
• Check the toothed belt for wear after 1000 km of operating distance and then after every 500 km of
operating distance (e.g. toothed-belt wear).
• Recommendation: Send the ELGA with signs of wear to Festo for repair.
If the customer repairs it, remove any abrasion residue from the shaft.
9

Repair

Note
Retensioning of the toothed belt reduces its service life considerably. In addition, the
technical data change, e.g. the feed constant.
• Make sure that the toothed belt is not retensioned.
The toothed belt is pretensioned so that it does not have to be retensioned during
its service life.
• Recommendation: Send the ELGA to Festo for repair.
As a result, the required fine tuning and tests will be taken into special consideration.
• Information about spare parts and accessories can be found at: www.festo.com/spareparts
10

Accessories

Note
• Please select the corresponding accessories from our catalogue
(è www.festo.com/catalogue).
Designation
ELGA-TB-RF(-F1)
Oil gun
Oil cartridge
Oil
1) (è Spare parts catalogue at www.festo.com/spareparts)
Tab. 6
Festo – ELGA-TB-G/-RF(-F1) – 1409b English
Part number/type
1)
8041022/AZTP-S-L
8041024/AZLO-H1-C-10
Elkalub VP 916, Chemie-Technik Co., Vöhringen
1)
33