Repair; Accessories - Festo EHMB Notice D'utilisation

EHMB
Note
The lubrication intervals depend on the product load.
· Cut the lubricating intervals in half in the following cases:
speeds > 1 m/s
load factor > 80 %
ambient temperatures in the vicinity of 40 °C
Travel profile corresponds to triangular operation (frequent accelerating
and braking)
dusty and dirty environment.
To optimise the service life of the toothed belt with swivel angles less than 360°:
1. Carry out the following steps after every 2 million load changes:
Dismantling the work load.
Rotate the effective load 90°.
Mount the work load again.
Also move the trip cams 90° in the same direction (è Fig. 16 in chapter 5
Electrical installation").
A different part of the toothed belt then comes into the load zone of the gears.
2. Repeat the commissioning.
9

Repair

Recommendation:
· Send the product to our repair service.
The necessary fine adjustments and tests will then be taken especially into
account.
10

Accessories

Note
· Please select the appropriate accessories from our catalogue
www.festo.com/catalogue
Festo EHMB 0912NH English
31