TOOLCRAFT ST50-D Notice D'emploi page 28

Only take the soldering gun by the handle. Never touch the hot sol-
dering tip or sleeve. Danger of burns!
Always put the soldering gun down on the soldering gun deposit
when heating and during soldering breaks.
Ensure that the workpiece has clean soldering contacts.
• Tin the heated soldering tip with solder. Wipe off excess solder at the dry cleaner.
• Heat the solder point and add solder.
• Let the soldering point cool off..
• Always clean the soldering tip at the dry cleaner after soldering.
• After completing the soldering work, put the soldering gun down in the deposit and
switch off the soldering station at the operating switch.
• Do not fi le down the soldering tip. This destroys the tip.
Let the soldering gun cool off after use.
Do not immerse in water.
28