TOOLCRAFT ST50-D Notice D'emploi page 26

• Disconnect the product from the power supply if not used for an ex-
tended period (e.g. during storage), pull the plug-in mains adapter from
the mains socket.
• When setting up the product, make sure that the cables are neither
bent nor pinched.
• Handle the product with care. It can be damaged by impact, blows or
when dropped even from a low height.
• If it can be assumed that safe operation is no longer possible, the de-
vice must be turned off and precautions are to be taken to ensure that
it is not used unintentionally. Then have the product inspected by a
specialist.
It must be assumed that safe operation is no longer possible, if:
- the device shows visible damage
- the device no longer functions
- the device was stored under unfavourable conditions for an extended
period of time
- if it was subjected to heavy stress during transport
• Do not leave packaging material unattended. It may become a danger-
ous toy for children.
• In commercial institutions, the accident prevention regulations of the
Employer's Liability Insurance Association for Electrical Systems and
Operating Materials are to be observed.
• If you have questions which remained unanswered in these operating
instructions, please contact us or another expert.
26