Safety Notes - TOOLCRAFT ST50-D Notice D'emploi

Safety Notes

The guarantee/warranty will expire if damage is incurred resulting
from non-compliance with the operating instructions! We do not as-
sume any liability for consequential damage!
Nor do we assume any liability for damage to property or personal
injury caused by improper use or failure to observe the safety infor-
mation. In such cases the warranty/guarantee is voided.
• The unauthorized conversion and/or modifi cation of the product is in-
admissible for safety and approval reasons (CE). Never dismantle the
product.
• The product is not a toy. Devices that are operated with mains voltage
have no place in the hands of children. Therefore, be particularly care-
ful when children are present.
Operate the product in a way that it is out of reach of children.
• The product is only suitable for operation in dry, closed rooms.
• The product is constructed pursuant to protection category II.
• The mains socket to which the mains plug is connected must be easily
accessible.
• Do not pull the mains plug from the mains socket by pulling the cable.
• Do not use the soldering station inside of rooms or in bad ambient
conditions where fl ammable gases, vapours or explosive dust may be
or are present! There is a danger of explosion!
• Do not attach any objects to the soldering station. Never cover the sol-
dering station. There is a danger of fi re!
• Do not tap off solder residue at the soldering tip using the soldering
station housing. This will damage the soldering gun (heating element)
and the soldering station.
23