St Offset Level; Nd Offset Level; Intensity 1; Intensity 2 - Xylem HYDROVAR Smart Manuel Opérateur

7.20.2 1
LEVEL 1
XX.X %
Press on the Hydrovar-Smart to change to
7.20.3 2
LEVEL 2
XX.X %
Press on the Hydrovar-Smart to change to

7.20.4 INTENSITY 1

INTENSITY 1
+XX.X %
Press on the Hydrovar-Smart to change to

7.20.5 INTENSITY 2

INTENSITY 2
+XX.X %
To leave the submenu press the
S U B M E N U
Offset
st Offset level
The level 1 is the start level of the 1
(adjustable between 0 and 100% of the additional
analogue input).
nd Offset level
The level 2 is the start level of the 2
(adjustable between 0 and 100% of the additional
analogue input).
This is the intensity of the 1
value at the zero point of the second analogue input
Settings: -200% up to +200% of the sensor range.
This is the intensity of the 2
value at the maximum point of the second analogue
input.
Settings: -200% up to +200% of the sensor range.
longer than 3 sec. to change to
28
st
Offset.
nd Offset.
st
Offset of the required
nd Offset of the required