Sibelmed SOMNIBEL Manuel De L'utilisateur page 41

Auto-adjusting Stimulus Levels
EasySleep Delay
Supine Delay
Stimulus Increase Period
Time at Maximum Power
Supine threshold angle
Visual indications (Note 5)
Notes:
1. Maximum temperature is restricted to 37ºC only when the device is used during the treatment (with the adhesive). Thus, the temperature on the adhesive will be
below 40ºC (maximum recommended temperature for the adhesive) and below 41ºC (according to EN60601-1 standard). / 2. Transport and storage conditions of the
device are reduced with respect to the IEC 60601-1-11 standard due to the specifications of the internal lithium –polymer battery, vibration motor and switches. / 3.
Values measured at a distance of 0.25 m for the maximum intensity level with a test method equivalent to ISO 3744:2010. / 4. See section COMPLIANCE ENHANCEMENT
SETTINGS for definitions. / 5. See section VISUAL INDICATIONS AND WARNINGS
534-800-MUM_Rev.1.05
0%, 25%, 50%, 75%, 100% (< 110 dB)
Device Turn ON / Device Turn OFF / Device running / Low battery / Charging battery / Self-Test error
somnibel
Somnibel
15 min
30 secs
60 secs
20 min.
45º
Incorrect Clipping
User's Manual
EN 17