Warnings - Sibelmed SOMNIBEL Manuel De L'utilisateur

Somnibel
must be adhered to the patient's body, at the forehead or chest, by means of a specifically designed
disposable fastening adhesive. The fastening adhesive should not be placed onto injured skin. The patient should
adopt a lying sleeping position (trunk inclination < 30º) while using the device.
Somnibel
Although can be used within conventional environmental conditions (see section TECHNICAL
SPECIFICATIONS), it is recommended to sleep with a room temperature between 18ºC and 26ºC. A hot
environment may induce excessive sweating that can deteriorate the adherence of the adhesive.
1.3

WARNINGS

Somnibel
is not intended to be used with other energy sources that are not covered in this manual.
Somnibel
Use only with accessories provided by the manufacturer or dealer, or those that meet the specifications
of this manual. The use of other accessories with
measurements.
The battery charger connector includes a protecting cover for avoiding penetration of liquids into the device and
for avoiding electrostatic discharges during their use. Do not use this accessory without this cover.
Contact of liquids with the internal parts of the device and the connectors must always be avoided. The system
is resistant to moderate splashing and dripping (Protection level IP22: protected against solid objects with a
diameter of 12.5 mm and above; protected against water drops falling vertically with a maximum inclination
of 15 degrees).
EN 6
Somnibel
can cause damage to the device or affect the
somnibel
User's Manual
534-800-MUM_Rev.1.05