Disposing Of The Ed12; Servicing And Maintaining The Ed12; Servicing The Ed12; Maintaining The Ed12 - Aventics ED12 Série Mode D'emploi

58 AVENTICS | ED12 | R414002587–BDL–001–AB

Servicing and maintaining the ED12

Danger of burns caused by hot valve coils!
Touching the valve coils during operating may lead to burns.
Let the device cool off before cleaning.
Do not touch the device during operation.
Damage to components!
Solvents and aggressive detergents will destroy the surface, labelling, and seals of the
device!
Only clean the device using a slightly damp cloth. Only use water to do this and, if
necessary, a mild detergent.
9.3

Disposing of the ED12

Dispose of the ED12 in accordance with the currently
applicable regulations in your country.
10 Servicing and maintaining the
ED12

10.1 Servicing the ED12

No special care is required for the ED12.
CAUTION
NOTICE
Make sure that all seals and plugs for the plug connections are
firmly fitted so that no humidity can penetrate the ED12 during
cleaning.

10.2 Maintaining the ED12

The ED12 is maintenance-free.
However, observe the system-specific maintenance intervals.