EN
Cleaning the Motor Exhaust Air Filter
4. Insert the motor exhaust air fi lter into the fi lter compartment. It must engage audibly.
Cleaning the HEPA Filter
Storage
•
For practical storage purposes, the fl oor nozzle can be hooked into the holder on the
back of the device and the telescopic tube (10) can be collapsed as far as possible.
•
Attach the nozzle holder to the telescopic tube (10) and insert the upholstery nozzle
as well as the crevice and brush nozzle into the holder.
•
Store the device in a dry, clean place that is protected from sunlight and is not
accessible to children and animals.
24
1. The motor exhaust air fi lter is located in the main device.
To remove it, reach into the recess and pull out the motor
exhaust air fi lter.
2. Wipe out the fi lter compartment with a damp cloth.
3. Tap out the motor exhaust air fi lter over a dustbin and
brush off loose dirt or thoroughly rinse with clear, luke-
warm water if necessary.
CAUTION: Do not under any circumstances clean the mo-
tor exhaust air fi lter in a washing machine or dishwasher!
Under no circumstances should you dry it in a tumble-dry-
er. Shake off excess water and let the motor exhaust air
fi lter dry completely in the air.
1. The HEPA fi lter is located on the back of the main device.
To remove it, reach into the recess, press down the locking
lug and remove the cover at the same time.
2. Reach into the recesses on the HEPA fi lter and remove it.
3. Tap out the HEPA fi lter or brush it off with a soft brush to
remove dirt and dust. CAUTION: Under no circumstances
should you clean the HEPA fi lter with water!
4. Insert the HEPA fi lter back into the fi lter compartment.
5. Put on the cover. When you do this, make sure that the
two locking lugs sit in the recesses which are provided for
them. Press the cover down to secure it. It must engage
audibly.