EN
Cleaning the Filter
A
B
2. Turn the dust container lid anticlockwise until you can pull it off.
8. When all parts are fully dry, insert the plastic dust fi lter back into the dust container.
9. Place the fabric fi lter back onto the plastic dust fi lter.
10. Place the dust container lid back onto the dust container and turn it tight.
11. Insert the dust container back into the motor unit by fi rst hooking the bottom part of
the dust container onto the motor unit and then pressing it against the motor unit until
the release button for the dust container engages.
Cleaning the Housing, Nozzles and Extension Suction Tubes
•
Clean the housing, the nozzles and the extension suction tubes if necessary using
a damp, soft cloth. Dry them with a soft cloth.
•
Remove hair and fl uff from the nozzles at regular intervals.
Storage
Store the vacuum cleaner in a cool, dry place out of the reach of children and animals.
20
1. Press down the release button for the dust container and
tip it slightly forwards to release the dust container. Then
remove it upwards.
3. Remove the fabric fi lter and tap it out or brush it down
using a soft brush if necessary.
CAUTION! Under no circumstances should you
rinse the fabric fi lter with water! The fi lter must not
become wet or be immersed in liquids!
4. Pull the catch for the bottom of the dust container down-
wards to open the dust container in the manner described
in the "Emptying the Dust Container" section.
5. Reach into the dust container and press out the plastic
dust fi lter upwards.
6. Rinse the dust container and the plastic dust fi lter as re-
quired with clear, hot water.
CAUTION! Never wash the dust container and
the plastic dust fi lter in the dishwasher or in the
washing machine!
7. Allow the dust container and the plastic dust fi lter to dry
fully in the air.
CAUTION! Under no circumstances should you
use a hair dryer to dry the dust container or the
plastic dust fi lter. Never reinsert the container and
the fi lter if they are still damp!