Before Initial Use; Assembly - Cleanmaxx CP-CY3811A Mode D'emploi

EN
Crevice nozzle and brush nozzle
Upholstery nozzle
Nozzle holder

Before Initial Use

CAUTION!
■ Danger of suffocation! Keep the packaging material away from children and animals.
• Unpack all parts and check the items supplied for completeness (see the "Items Sup-
plied and Device Overview" chapter) and possible transport damage. If you fi nd any
damage to the components, do not use them (!), but contact our customer service
department.
• Remove possible slips of paper, stickers etc. from the dust container (7) and from
the device.

Assembly

CAUTION!
■ Before you attach or detach any accessories, ensure that the device is not connected
to the mains power.
Fold over the end piece in the direction of the arrow to
convert the crevice nozzle into a brush nozzle:
• The crevice nozzle is suitable for upholstery, cleaning
the inside of cars and for all nooks and crannies that
cannot be reached with the other nozzles.
• The brush nozzle is suitable for all uneven objects,
furniture, lamps, profi les and skirting boards, window
ledges, etc.
The upholstery nozzle is suitable for cleaning delicate
objects and upholstery, e.g. lamp shades, sofas etc.
The nozzle holder can be used to store two of the suction nozzles
supplied. The holder is clipped onto the telescopic tube.
1. Plug the suction hose (2) into the suction hose connec-
tion (8). When you do this, make sure that the two locking
lugs sit in the recesses which are provided for them. Twist
the suction hose (2) clockwise to secure it in place.
To detach the suction hose (2), twist it anticlockwise and
pull it out of the suction hose connection (8).
20