Connection Combinations - Truma iNet Box Instructions De Montage

Connection combinations

Appliance TIN1
X
Truma
control panel
X
Truma
heating system
X
Truma
air conditioning
system
Alde X
heating system
Bus adapter
–
To be able to use the automatic climate control, the Truma heating system and the Truma air conditioning system must
be directly or indirectly connected via the Truma control panel to the TIN1 connection of the Truma iNet Box.
To be able to use the timer of the Truma App, a Truma control panel must be connected.
Additional Truma appliances can also be connected via Bluetooth to the Truma iNet Box.
16
TIN2 Additional information
–
–
A maximum of one Truma heating system can be connected to the Truma iNet Box
at the TIN1 connection or indirectly via the Truma control panel. Truma heating
systems can only be controlled by the Truma iNet Box in combination with a
Truma control panel.
X
A maximum of one Truma air conditioning system can be connected to the
Truma iNet Box at the TIN1 connection, and only in combination with a
Truma control panel.
Two different Truma air conditioning systems can be connected in series at the
TIN2 connection.
It is not possible to simultaneously connect Truma air conditioning systems to
TIN1 and TIN2 if a Truma heating system is being used.
– The Alde heating system can only be controlled by the Truma iNet Box in combina-
tion with an Alde control unit.
X Interface modules to third-party providers e.g. Schaudt AD94, SCI101, SCI109.