Symbols Used; Intended Use; Scope Of Delivery - Truma iNet Box Instructions De Montage

Masquer les pouces Voir aussi pour iNet Box:
Table des Matières

Publicité

Truma iNet Box
Table of contents

Symbols used ........................................................................ 1

Installation instructions
Safety instructions ............................................................ 1

Intended use ....................................................................... 1

Scope of delivery ............................................................... 1

Dimensions ......................................................................... 2
Connections / control elements ...................................... 2
Displays ............................................................................... 2
Installation .......................................................................... 3
Selecting a location ............................................................... 3
Assembly ............................................................................... 3
Connect the GSM antenna .................................................... 3
Electrical connection ............................................................. 3
Connection combinations ..................................................... 5
Connection examples ........................................................... 7
Symbols used
The appliance must only be installed and repaired by an
expert.
Symbol indicates possible hazards.
Note containing information and tips.
12
Installation instructions
Safety instructions
Only competent and trained persons
(experts) may install, repair or perform the
function check on the Truma product in
accordance with the installation and oper-
ating instructions and the currently
accepted technical regulations. Experts
are persons who, based on their specialist
instruction and training, their knowledge
and experience with Truma products and the relevant stan-
dards, can carry out the necessary work properly and identify
potential hazards.
Intended use
The Truma iNet Box was developed for controlling iNet-capable
appliances via mobile terminal devices (e.g. smartphones,
tablet PCs). Communication is via Bluetooth or GSM.
Scope of delivery
1 Truma iNet Box
4 screws (depending on version)
1 set of operating instructions
1 set of installation instructions
1 12 / 24 V connector cable (+ = red / black - = black)
1 connector cable (TIN bus, depending on version)
1 cable binder (depending on version)

Publicité

Table des Matières
loading

Table des Matières