Basic Disc Play - Rotel RDV-1050 Manuel De L'utilisateur

Recalling the DVD PLAYER SET
UP menu
e
Press CHOICE for a few seconds until the
DVD PLAYER SET UP display appears.
Changing the Display
Window Brightness
i
Press DIMMER on the remote control unit.
You can select the display window brightness
from three levels, or off. If the brightness is
set to off, nothing will be shown on the dis-
play.

Basic Disc Play

1 Press the OPN/CLS button
panel or the OPEN/CLOSE button
the remote control to open the disc tray.
2 Place a disc in the disc tray.
Place 8-cm discs
in the inner recess
f8
3 Press (PLAY) . The RDV-1050 starts
/
playback from the beginning of the disc.
To stop disc play press
.
To pause disc play press (PAUSE)
,
To resume playback, press
/
NOTES: Do not insert an unplayable disc.
(See Playable Discs section.)
When placing a disc on the disc tray, be
sure to set it in the recess. Otherwise, the
disc may be damaged when the disc tray is
closed, or you may not be able to remove
the disc from the RDV-1050.
When a DVD Audio disc is played the
DVD AUDIO indicator 4 lights.
With double-sided DVD discs the side of
the disc facing down is the side that is
played.
13
On-Screen Menu
After loading a DVD VIDEO, SVCD or Video
CD disc, a menu may appear on the TV screen.
From the menu, you can select an item to be
played.
For DVD VIDEO
1 Press
2 Press ENTER
back of the selected item.
For SVCD/Video CD
Press the numeric buttons to select an item. The
RDV-1050 starts playback of the selected item.
On Screen Icons
During disc playback, you may see icons dis-
played over the picture. These have the fol-
lowing meanings.
9
on the front
2
on
– Appears at the beginning of playback
mode.
– Appears at the beginning of pause mode.
– Appears at the beginning of fast for-
With the
label side up p
ward/backward playback with the current
speed.
– Appears at the beginning of slow-
motion playback with the current speed.
– Is displayed at the beginning of a scene
recorded from multiple angles. See the Select-
ing a Scene Angle section.
– Is displayed at the beginning of a scene
recorded with multiple audio languages. See
00
(STOP) .
the Changing the Audio Language or Sound
d-
.
section.
f8
(PLAY) .
– Is displayed at the beginning of a scene
recorded with multiple subtitle languages. See
the Selecting the Subtitle Language section.
You can choose to not have these icons dis-
played. See the Selecting Preference section.
jwqk
to select an item.
;
. The RDV-1050 starts play-
About PBC (Playback Control)
Some SVCD/Video CD discs support the PBC
function. The PBC function allows you to en-
joy menu-driven operation and high-resolu-
tion still images which have a resolution four
times greater than moving pictures.
• To play a PBC-compatible SVCD/Video CD
disc without activating the PBC function,
press the Numeric buttons
f
(PLAY) to start playback.
/
• To activate the PBC function again:
=
Press TOP MENU or MENU
0
Press (STOP) to stop playback, then
.
press (PLAY).
/
To Check Playback Status
l
Press ON SCREEN to see the current se-
lection number (the title/chapter number for
DVD VIDEO or track number for SVCD/Video
CD/ Audio CD), time information (the track
or chapter time while stopped, or elapsed track
or chapter time during playback) and the trans-
port status (stop, playback, pause, etc.) on the
TV screen.
Example: for DVD VIDEO
Pressing ON SCREEN again brings up the menu
bar under the status bar, from which you can
access various functions. See the Menu Bar
section of this manual for more information.
To turn off the status bar press ON SCREEN
repeatedly until the status bar goes off.
English
4
instead of
h
, or