Repeat Playback; Changing The Language, Sound And Scene Angle - Rotel RDV-1050 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

RDV-1050 DVD Player
To Play Tracks in Random
Order (Random Play)
1 In stop mode, press ON SCREEN
The menu bar appears on the TV screen.
2 Press
/
qk
to move
Screen example for Audio CD
TRACK 33
OFF
PROG. RND.
;
3 Press ENTER
. The RDV-1050 starts ran-
dom playback.
With a DVD AUDIO/SVCD/Video CD disc,
the menu bar is automatically tuned off.
During random playback, the RND indicator
lights up in the display window.
After playing all tracks of the disc, the
RDV-1050 stops the disc and exits the ran-
dom playback mode.
To stop and quit random playback
00
Press
(STOP)
. The RDV-1050 stops
.
playback and exits the random playback
mode.
NOTE: In the Random Play mode the
tracks in a bonus group are not played.

Repeat Playback

To Repeat the Current
Selection or All Tracks
For DVD AUDIO/DVD VIDEO: During
playback –
For SVCD/Video CD/Audio CD: In any con-
dition except SVCD/ Video CD playback with
PBC –
3
Press REPEAT
. If you press REPEAT in stop
f
mode, press
(PLAY)
to start playback.
/
Each time you press REPEAT, the repeat mode
cycles among All Repeat, Repeat 1 and Off.
The indication on the display window shows
the selected repeat mode.
: Repeats the current group for DVD
AUDIO, the current title for DVD VIDEO
or all tracks for SVCD/Video CD/Au-
dio CD.
l
twice.
1: Repeats the current chapter for DVD
VIDEO or the current track for DVD
AUDIO SVCD/Video CD/Audio CD.
to
RND.
.
No indication: The repeat mode is off.
A window which indicates the current repeat
TIME
25:58
mode will be displayed on the TV screen. The
mode indication on the window is the same
as the one on the menu bar.
Repeat mode example on the TV screen
To Stop Repeat Playback
Press
(STOP)
.
When a DVD AUDIO/DVD VIDEO disc is set,
the RDV-1050 stops playback and quits the
repeat mode. When an SVCD, Video CD or
Audio CD disc is set, the RDV-1050 stops
playback but does not quit the repeat mode.
To Quit Repeat Playback
Press REPEAT
cator goes off in the display window.
NOTES: When the program playback mode
is active with an SVCD, Video CD or Audio
CD, the repeat mode changes in the same
manner.
Note, however, that in the
RDV-1050 repeats all the programmed
tracks instead of all tracks on the disc.
The repeat playback may not work with
some discs, even if you select one of the re-
peat modes.
To Repeat a Specified Part
(A-B repeat playback)
First make sure: The RDV-1050 is in play-
back mode except SVCD/Video CD playback
with PBC.
1 Press ON SCREEN
appears on the TV screen.
18
00
.
3
until the repeat mode indi-
mode the
l
twice. The menu bar
qk
2 Press
/
to move
;
then press ENTER
. The pull-down menu
for repeat mode selection appears.
jw
3 Press
/
to select A-B.
4 Press ENTER at the beginning of the part
you want to repeat (point A). The pull down
menu disappears. The repeat icon
shows.
A-
5 Press ENTER at the end of the part you want
to repeat (point B). The repeat icon
shows . The RDV-1050 locates
A-B
"A" and starts repeat playback between "A"
and "B." The
indicator lights in the dis-
play window.
To Quit A-B Repeat Playback
qk
Press
/
to move
;
and press ENTER
. The A-B repeat mode
turns off, then normal playback continues.
NOTE: The A and B points must be set in
the same title/track.
Changing the Language,
Sound and Scene Angle
Selecting the Subtitle
Language (SUBTITLE)
Some DVD VIDEO and SVCD discs contain
more than one subtitle language. You can
choose a desired one from them. At the be-
ginning of the part where the subtitles are
recorded,
appears on the TV screen (ex-
cept when the ON SCREEN GUIDE preference
is set to OFF).
1 During playback, press SUBTITLE
subtitle selection window appears on the
TV screen.
2 Press
/
jw
or SUBTITLE to select the
subtitle. Each time you press
TITLE, the subtitle language changes.
to
,
to
,
A-B
5
. The
/
or SUB-

Publicité

Table des Matières
loading

Table des Matières