Changing Playback Order - Rotel RDV-1050 Manuel De L'utilisateur

Playing a Bonus Group on a
DVD AUDIO disc
Some DVD AUDIO discs contain a special
group called "bonus group" whose contents
are not opened to the public. The bonus group
is assigned to the last group of a disc. To play
back a bonus group, you have to enter a
specific "key number" for the bonus group.
A way of getting the key number depends on
discs.
1 In stop mode, press the numeric buttons to
select the bonus group number (the last
group). The display window and on-screen
display prompt you to enter the key num-
ber. The following box shows on the TV
screen.
_ _ _ _
KEY
2 Press the numeric buttons to enter the key
number. If you enter the correct key num-
ber and press ENTER ;
starts playback of the bonus group. If you
entered a wrong key number, you are
prompted to enter the correct key number.
To turn off the key number entry
display
00
Press (STOP) , open the disc tray, or
.
turn the power off.
• Once you enter the correct key number, the
unit memorizes it until you turn off the power
or open the disc tray.
• If you specify a track in the bonus group
for the program playback, you will also be
prompted to enter the key number during
program play.
• In the random playback, tracks in the bo-
nus group are not played back.
17

Changing Playback Order

Playing Tracks in a Specific
Order (Program Play)
By programming tracks, you can play up to
99 tracks in any order. You may program the
same track more than once.
1 In stop mode, press ON SCREEN
The menu bar appears on the TV screen.
2 Press
Screen example for Audio CD
3 Press ENTER
pears. The PRGM
in the display window.
4 For DVD Audio Press the numeric but-
tons to specify selections in the desired order
by group and track numbers.
For each program step, specify a group first,
, the RDV-1050
then a track. To specify track 14 in group
2: press 2, +10 then 4.
For SVCD/Video CD/Audio CD Press
the numeric buttons to specify the tracks in
the desired order.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
Example of DVD Audio Programming Table
To correct the program press
move
TV/VIDEO - CANCEL
and the subsequent programmed tracks move
up. Pressing
grammed tracks.
l
qk PROG.
/ to move to
;
. The program table ap-
indicator lights up
/ jw
to the track to be corrected, then press
[
. The track is erased
0
(STOP) clears all the pro-
.
5 Press (PLAY)
/
back. With an Audio CD disc, the program
table remains on the TV screen during pro-
gram playback. (Pressing ON SCREEN
brings up the status bar.)
When all of the programmed tracks have
finished playback, the RDV-1050 stops and
the program table appears again. Note that
the program remains.
twice.
NOTE: During program playback, you
.
cannot edit the program contents.
To Check the Program Contents
During playback, press
back stops and the program table is shown.
When the RDV-1050 is playing back an Au-
dio CD and the program table is not shown,
you can bring up the table by carrying out
steps 1 to 3.
During DVD Audio/SVCD/Video CD play-
back, you can check the program contents via
the menu bar.
To stop program playback
00
Press (STOP)
.
To clear the program
While stopped and the program table is shown,
press (STOP) 00
.
To exit the program mode
After clearing the program, press ON SCREEN
l
.
NOTES: When the disc tray is opened or the
RDV-1050 is turned off, the program is
cleared.
If you are going to program a track in the
bonus group of an AUDIO DVD, you will be
prompted to enter the key number for the bo-
nus group.
to
English
f
to start program play-
00
(STOP) . Play-
.
.
.