Playable Discs - Rotel RDV-1050 Manuel De L'utilisateur

RDV-1050 DVD Player
Precautions for the Safe Use
of Batteries
Observe the following precautions for the safe
use of batteries. If they are used improperly
their life will be shortened, they may burst or
their contents may leak.
• Remove the batteries from the remote con-
trol if it will not be used for a long period
of time.
• Remove dead batteries and dispose of them
properly.
• Never leave dead batteries lying around.
Do not take them apart, mix them with other
refuse, or throw them into an incinerator.
• Never touch liquid that has leaked out of
a battery.
• Do not mix new and old batteries, or bat-
teries of different types.
Programming the RR-DV96
Remote to Control a TV
After it is programmed the RR-DV96 can op-
erate your TV set.
1
1 Set the TV/DVD switch
2 Press and hold down the TV/VIDEO-CAN-
[
CEL button. Then enter the manufacturer
code of your TV listed in the following table
using the numeric buttons (0 - 9)
not release TV/VIDEO-CANCEL button until
the next step is completed. (Example: To enter
code "01" press and release the "0" but-
ton, then press and release the "1" button.
;
3 Press the ENTER button, then release
the TV/VIDEO-CANCEL button.
4 Test the program setting by pressing the TV
POWER
set on. If there is more than one code listed
for the manufacturer of your TV, try them
one by one until you succeed.
Manufacturer No.
Aiwa
Beijing
CCE
Changhong 34
Daewoo
Ferguson
Finlux
Funai
Gradiente
Grundig
Hitachi
ITT
Jinxing
JVC
Konka
LG (Goldstar) 18
Magnavox
Mitsubishi
Mivar
Remote Control TV Operation
When the TV/DVD switch
sition the following buttons can be used to con-
trol the TV.
to TV.
TV POWER
Turns the TV on or off.
CH+ and CH –
Changes the TV channels.
4 . Do
VOL+ and VOL –
Adjusts the TV volume.
TV/VIDEO button
Switches the TV input between TV and Video.
0 - 10 and (Numeric Buttons)
Selects the TV channels. Note: For some TVs,
pressing "+10" functions as the "+100". The
"10" button functions as ENTER if your TV re-
quires pressing the ENTER after selecting a chan-
nel number.
MUTING button
Mutes the TV sound.
External Remote In
The 3.5mm mini-jack (labeled EXT REM IN)
receives command signals from an industry
standard infrared receiver. This feature is useful
when the unit is installed in a cabinet and the
front panel sensor is blocked. Consult your au-
thorized Rotel dealer for information on ex-
ternal receivers and the proper wiring of a jack
to fit the mini-jack receptacle.
y
button to see if it turns your
Manufacturer No.
36 NEC 20
22 Noblex 22
02 Nokia 31
Panasonic 04, 11
17, 37 Peony 34, 38,
27 39
30 Philco 10, 17,
32 21
15, 20 Philips 02
19 RCA 05
10 Samsung 12, 33,
28 34, 35
38 Sanyo 13, 16
01, 23, Sears 13
24, 25 Sharp 06
40 Sony 07
TCL 41
02 Thomson 26
03 Toshiba 08, 14
29 Zenith 09
1
is in the TV po-
y
jw
qk
[
4
p
u
10

Playable Discs

This unit can play the following types of discs:
DVD Video DVD Audio
Video CD
SVCD Audio CD
The RDV-1050 can also play back the following
discs:
• 9.4GB/4.7GB DVD-RAM with no cartridge,
recorded with the video recording standard
version 1.1.
• 9.4GB/4.7GB DVD-RAM with cartridge but
can be removed from the cartridge, recorded
with the video recording standard.
• DVD-R/RW discs written in the DVD VIDEO
format and finalized.
• DVD-RW (version 1.1) discs written in the
VR (Video Recording) format and finalized.
• CD-R and CD-RW discs written in the SVCD,
Video CD or Audio CD format and final-
ized.
• CD-R and CD-RW discs written in MP3 or
WMA in accordance with the "ISO 9660"
format.
• CD-R and CD-RW discs written in JPEG in
accordance with the "ISO 9660" format.
The RDV-1050 can play back audio signals
recorded in MIX-MODE CD, CD-G, CD-EX-
TRA and CD TEXT.
NOTES: If a disc is dirty, scratched or
warped, or has unusual disc or recording
characteristics, it may take considerable
time for the RDV-1050 to read the disc
contents. In some instances the RDV-1050
may not be able to play certain discs.
With some DVD-RAM and DVD-RW discs
(recorded in VR format), portions such as a
part between two programs may not be
played back smoothly.