Symbols; Safety Notes - Burkert MP05 Instructions De Service

Bloc multiple et profil pneumatique modulaire
Masquer les pouces Voir aussi pour MP05:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

G
N
ENERAL
OTES

Symbols

In these Operating Instructions, the following symbols are used:
indicates a working step that you will have to carry out.
ATTENTION!
Indicates information which must be followed. Failure to do this could endanger your
health or the functionality of the device
NOTE
Indicates important additional information, tips and recommendations.

Safety notes

To ensure that the device will function correctly, and have a long service life, please comply with the
information in these Operating Instructions, as well as with the application conditions and additional data
given in the Type 5470 data sheet:
• When planning the application of the device, and during its operation, observe the general technical
rules!
• Observe the relevant accident prevention and safety regulations applicable for electrical equipment
throughout the operation, maintenance and repair of the device; always switch off the voltage supply
before working on the system!
• Note that lines and valves must not be unscrewed from systems that are under pressure!
• Take suitable measures to prevent unintentional operation or impermissible impairment!
• If these instructions are ignored, no liability will be accepted from our side, and the guarantee on the
device and on accessories will become invalid!
NOTE
Approvals such as Ex, UL, UR, CSA, DVGW etc., will be indicated on the rating plate, or
by a special label.
If there are discrepancies, please contact immediately your Bürkert subsidiary or our customer service:
4 - 5470 / MP05
Bürkert Steuer- und Regelungstechnik, Service-department
Chr.-Bürkert-Str. 13-17, D-76453 Ingelfingen
Tel.: (07940) 10-111
Fax: (07940) 10-448
eMail: info@de.buerkert.com

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

5470

Table des Matières