Use; Parent Unit Touch-Screen; On/Off Switching; Connection Check - Alecto DBX-62 Mode D'emploi

4 USE

Don't forget that this baby intercom is merely an extra piece of mind.
The device can never replace the physical and monitoring presence of a
parent or babysitter.

4.1 PARENT UNIT TOUCH-SCREEN:

To prevent functions from being switched on or off by accident, the
operation of the touch-screen is set to sleep mode. You can activate the
operation mode by briefly pressing the
on.
Don't forget that some buttons must be pressed briefly and others must
be pressed for a longer time, please see the user instructions.

4.2 ON/OFF SWITCHING:

Baby-unit:
Slide the ON/OFF switch to the ON position to turn the baby
unit on or to the OFF position to turn the baby unit off.
Parent-unit:
Press and hold the
parent-unit.
Press and hold the
the parent-unit.

4.3 CONNECTION CHECK:

As soon as you switch on the parent-unit, it will start searching for the
baby-unit.
If the parent-unit still hasn't located the baby-unit after 30 seconds
(because it's still turned off or out of range.)
Every few seconds a warning tone will sound while the display light
flashes. Additionally, the antenna symbol
OF RANGE" appears in the display.
You can stop this warning tone by briefly pressing the
as the parent unit is connected to the baby unit, all of these warnings will
stop.
button, the display light will turn
button for 3 seconds to turn on the
button again for 3 seconds to turn off
will flash while the text "OUT
88
button. As soon