Lullabies; Feeding Timer - Alecto DBX-62 Mode D'emploi

4.6 LULLABIES:

The DBX-62 is pre-programmed with 6 different lullabies and sounds that
you can set via the parent unit. After selecting your desired sound, it will
be played for up to 15 minutes.
1. briefly press the
2. press and hold the
playback
3. you can use the
song or sound
• playback will stop automatically after 15 minutes or
you can repeat instructions 1 and 2 above to stop
playback earlier
• use the + and – buttons on the baby unit to adjust the
volume
• the sound of the lullabies can be heard at the parent unit through the
microphone of the baby unit; you can decrease the volume of the
parent unit if this bothers you

4.7 FEEDING TIMER:

The DBX-62 parent unit can emit a signal when it's time for your baby to
be fed. First you must set how many hours are in between feeding times:
1. briefly press the
2. press and hold the M button for 3 seconds to open the menu
3. use the
FEEDING TIME
4. briefly press the M button
5. use the
between feeding times in increments of half
hour
6. briefly press the
selection and to leave the menu
• you only have to set this time once, but you'll
need to adjust it again when the time in between feeding times
changes or when you prefer to turn this function off (by selecting 'off'
in the above step 5)
button to activate the touch-screen
button for 1 second to start
and
button to activate the touch-screen
and buttons to select the option
and buttons to select the time in
button to confirm your
buttons to select a different
90
2
3
1
5
3
/
an
4
2 /
6
1 /