Installation; Parent-Unit - Alecto DBX-62 Mode D'emploi

3 INSTALLATION

3.1 PARENT-UNIT:

The parent-unit is powered by the supplied battery pack. This battery
pack can be charged using the supplied power adaptor combined with
the charger.
ATTENTION: ONLY INSTALL THE SUPPLIED BATTERY
PACK! INSTALLING DIFFERENT MODELS CAN CAUSE
Only connect the supplied adaptor. Connecting any other
power adaptor can cause damage to the baby intercom or
even fire.
5. Place the parent-unit onto the charger. The CHARGE indicator on
the charger will be lit while the battery pack is being charged.
Attention: the CHARGE indicator on the charger remains lit, even when
the battery is fully charged.
1. Slide the battery cover off the parent unit.
2. Insert the supplied battery pack into the
parent-unit and connect the plug with the
parent-unit. Pay attention, the plug only fits
one way. Never force its connection.
DAMAGE OR EVEN EXPLOSION
3. Place the battery cover back onto the
parent-unit.
4. Connect the power adaptor with the wider
plug to the DC5V input at the rear of the
charger and plug the power adaptor into a
230 Volts wall socket.
85