Temperature Alarm - Alecto DBX-62 Mode D'emploi

• the name has a maximum length of 14 characters, including spaces
• you cannot correct a mistake; in this case, leave the setting and start
again

5.5 TEMPERATURE ALARM:

The display of the parent unit shows the temperature transmitted by
the baby unit. You can assign a minimum or maximum temperature to
this function and have the unit sound an alarm when these values are
exceeded:
1. briefly press the
touch-screen
2. press and hold the M button for 3 seconds to
open the menu
3. use the
TEMP ALARM
4. briefly press the M button
5. use the
you want to set or adjust the lower or the
upper limit
6. briefly press the M button
7. use the
briefly press the M button
8. repeat step 5-7 if you want to set the other temperature limit
9. briefly press the
leave the menu
• the upper limit can be set between -3°C and 50°C
• the lower limit can be set between -19°C and 3 degrees lower than
the upper limit
• select ''OFF" if you don't want to set an upper or lower limit
• when the set temperature limit is exceeded, the temperature display
will start flashing while 'TOO WARM' or 'TOO COLD' is shown
• if the ALARM TONE function is activated, you'll also hear short
notification tones
• don't forget that the temperature display is only an indication, you'll
have to take a tolerance of +/- 2°C into account
• at temperatures above 50°C and under -19°C, '- -' will appear in the
display
button to activate the
and buttons to select the option
and buttons to select whether
and buttons to adjust the selected temperature limit and
button to confirm the set temperature limits and to
95
5
3 7
/ /
4 / 6
2 /
9
1 /